• Welcome to the new Macedonian Truth Forum. All posts, members and private messages have been moved over from the old forum.

    Passwords from the old forum could not be carried over, so please use Forgot your password? to set a new one. The reset link is emailed to the address on your account.

  • Rules and Regulations at the forum of the Macedonian Truth Organisation (MTO)

    (1) The national-ethnic and cultural-linguistic identity of the Macedonian people is historically Macedonian, and derives its character from the native, indigenous and geographic homeland of the Macedonians, which is called Macedonia. To ensure that their human rights, integrity and heritage are appropriately respected, the only nouns and adjectives acceptable when reference is made to the above character and identity markers is Macedon, Macedonia, Macedonian and Macedonians.

    (2) The nation-state of the Macedonian people is the Republic of Macedonia, and is to be referred to by this official title so long as the 'republic' prefix is consistently applied to other states. Alternative references are the Macedonian Republic, or simply, Macedonia.

    (3) The 'ethnic' prefix is only acceptable for Macedonians in cases where differentiation is specifically required - so long as it is in context and consistent where it concerns its application to other ethnic groups.

    (4) Should any other differentiation be specifically required, the names of other ethnic groups that reside with Macedonians in either the Republic of Macedonia or the occupied Macedonian regions in Greece, Bulgaria, Serbia or Albania, are to be given a prefix.

    (5) Negating the identity, language and culture of the Macedonian people by deliberate avoidance of the terms Macedonia, Macedonian and Macedonians, or by any other means, is not permitted.

    (6) Systematic anti-Macedonian propaganda and rhetoric are not permitted.

    (7) Threads irrelevant to the Macedonian Cause, the community at the Macedonian Truth Organisation or the Macedonians in general may be considered as spam or not in the spirit of the forum. In such cases they are not permitted.

    (8) Continual posting of messages in threads with the sole purpose of deviating from the initial topics with the use of unrelated and unnecessary information is not permitted.

    (9) All posts, external articles, reports, etc that are cited in languages other than Macedonian or English, must be accompanied with a translation in one or both of the said languages.

    (10) Despite the possibility of some conversations and debates becoming heated, extreme abuse and/or racism, vulgar language and/or terminology, threats, revelation of personal information about others, harassment, and other such behavior will not be permitted. If deemed necessary all relevant information including member details will be reported to the appropriate authorities for investigation which may result in legal action.

    (11) Threads that are created must have a summary of a topic or excerpt of an article found in pertinent link(s) that have been included. One line threads will be considered unaccetable spam and are therefore not permitted.

    (12) Compulsive and deliberate lies, irrespective of the topic, are not permitted.

    (13) Any symbols or avatars found to be perceived as offensive to Macedonians are not permitted.

    (13) Any explicit or extreme material is not permitted.

    Failure to adhere to the above rules and regulations will result in a ban after 3 breaches. This may be reconsidered in some cases should the circumstances be of an unorthodox nature and/or require special consideration. To assure an effective deterrent against an individual or individuals with the sole purpose of causing dissent through spamming, racism or other improper means, the above rules will be strictly enforced.

    The MTO administration will monitor all discussions as reasonably practical and reserve the right to remove any post and/or member from the forum, and update the rules and regulations as required. Members are encouraged to immediately report any post and/or member to the MTO administration if they feel that these rules have not been abided by.

    The views expressed on this forum are those of the individuals. The only official representation of the MTO is made by the "Macedonian Truth Organisation (Site Owner)" username, and no other.

  • Macedonian Cause

    The Macedonian Truth Organisation calls on God in Heaven to protect, bless and guide the endeavour it is committing to undertake, and that is to work towards:

    Securing Macedonia as a free, independent and democratic republic in which sovereignty lies with the Macedonian citizens; as the nation-state of the Macedonian people in which they can preserve their culture, language and identity; as a state in which the Macedonian language and culture form the basis of public life and act as important unifying elements of Macedonian society; as the home of all its citizens to which it guarantees and obliges their inalienable natural rights and corresponding responsibilities;

    The acknowledgment as self-evident and irrefutable the existence of the:

    1) Indigenous, ethnonational name of Macedonia;
    2) Macedonian people, language and identity;
    3) Macedonian culture, symbols and folklore;
    4) Macedonian ancestry, heritage and history in its entirety; and
    5) Macedonian Orthodox Church;

    Securing recognition by the International Community of the tragedies endured by the Macedonian people, of the division of Macedonia with the signing of the Treaty of Bucharest on August 10, 1913, and the genocide committed against the Macedonian people at the hands of the Greek, Bulgarian and Serbian states and their respective churches during the 19th and 20th centuries;

    Ensuring that the Interim Accord is declared ‘null and void’ and that all constitutional provisions, acts, commitments, agreements, legislation, regulations, policies or programs emanating from, supporting or consequential to the Interim Accord are also declared ‘null and void’, including the use of any symbols and the completion of any acts imposed by, or originating from, the Interim Accord.

    Ensuring that the Framework Agreement is abolished and that all constitutional provisions, acts, commitments, agreements, legislation, regulations, policies and programs emanating from, supporting or consequential to the Framework Agreement are also abolished and replaced by a framework of constitutional and statutory law based on inalienable natural rights and corresponding responsibilities and universally codified human rights mechanisms.

    Securing the abolishment of any existing constitutional provisions, acts, agreements, legislation, regulations, policies and programs that discriminate against the Macedonian people, in any international organisation or any of the countries of the International Community where such constitutional provisions, acts, agreements, legislation, regulations, policies and programs exist, and thereby ensuring the freedom for Macedonians to exercise their inalienable natural rights and fulfil their corresponding responsibilities, and practice their culture, language and religious faiths in all the countries of the International Community without hindrance;

    The empowerment of Macedonians to undertake a moral revolution and to instil and/or reinvigorate within themselves a deep-rooted national, cultural, linguistic and historical dignity and a commitment to the exercise of freedom based on inalienable natural rights and corresponding responsibilities;

    The recognition of the Macedonian minorities in the neighbouring states of Macedonia as well as the respect for the inalienable rights and freedoms of the Macedonian minorities, as provided for by natural law and as codified by the United Nations Charter, the Universal Declaration of Human Rights and other universally codified human rights mechanisms;

    The full and unreserved respect of, and the support for, the rights of all people of non-Macedonian descent living in Macedonia and around the world, who share a reciprocal full and unreserved respect for the Macedonian people, their homeland and their state;

    The cultural unification and solidarity of the Macedonian people living in all parts of historical Macedonia and adjacent territories, as well as Macedonians throughout the world;

    The unity of all Macedonians on the principles, objectives and achievement of the Macedonian cause as defined by this declaration.

3D printed guns

Risto the Great

Senior Member
Plans/files are all over the internet.
Buy a (now) relatively cheap 3D printer and you can print out everything you need to smite your enemies.

3d-printed-gun.jpg


Personally, I'd rather the plans for Jessica Alba were available, but the 3D gun might help clear a path to the real version of her.

What are your thoughts about the implications of such game changing technology?
 
Tyrants can't suppress freedom forever. Having said that, I don't know how effective these will actually be. From what I undertand, they will be 100% plastic and its yet to be seen how long they will actually last. Further, unless you have a mini-factory in your garage, you'll still have to buy or source your ammunition from somewhere.
 
Tyrants can't suppress freedom forever. Having said that, I don't know how effective these will actually be. From what I undertand, they will be 100% plastic and its yet to be seen how long they will actually last. Further, unless you have a mini-factory in your garage, you'll still have to buy or source your ammunition from somewhere.

...3D printed ammo...(?)
 
You need gun poweder and a primer to ignite it. On top of that, I'm not sure how effective a plastic bullet would be.

If they ever make them so you can use metals in addition to plastics, then maybe.

Plastic bullets have been used since the early 1970's for riot control purposes
 
Plastic bullets have been used since the early 1970's for riot control purposes
They have plastic, wax and rubber bullets, but they don't actually cause any serious damage or pose a credible threat when you really need them to. They're of limited use.
 
I think the MTO should embrace the new technology and invest in a life size 3d printer and startr producing useful Macedonians for export to Macedonia! :hammer:
 
From what I undertand, they will be 100% plastic and its yet to be seen how long they will actually last. Further, unless you have a mini-factory in your garage, you'll still have to buy or source your ammunition from somewhere.

Not 100% plastic. Apparently an old nail or something is needed for the firing pin. The first few designs were good for about 5 or 6 shots before they started falling apart.
 
The Constitution And The 3D Printed Plastic Pistol

The Constitution And The 3D Printed Plastic Pistol

http://techcrunch.com/2013/05/15/the-constitution-and-the-3d-printed-plastic-pistol/


By now, you have probably heard about the Liberator, a 3D printed plastic gun designed, assembled, and test-fired by Cody Wilson of Defense Distributed. Is it legal?

Last week, the State Department’s arms export office demanded that Defense Distributed remove CAD files for the Liberator from its website. Defense Distributed complied with the takedown letter right away, despite strong language on its website promising it would be “a home for fugitive information” and “No object file will be censored unless it is malicious software.” Predictably, it didn’t take long for the CAD files to make their way to BitTorrent, where they’ll be available forever.

Angle 1: Arms Control

It’s worth reading the letter from the State Department, which is only two and a half pages long. In a nutshell, the letter demands the takedown while it decides whether publishing firearms-related CAD files online violates ITAR. ITAR, which stands for the International Traffic in Arms Regulations, are rules that the State Department promulgated under the Arms Export Control Act. One part of ITAR is the United States Munitions List, which is a master list of products and technologies that can’t be exported without prior government approval under a licensing system. Because Defense Distributed didn’t seek an export license, there’s a problem.

Are CAD files munitions? The State Department believes the Liberator files fall under the Category I of the US Munitions List, which covers firearms and related “technical data.” Section 120.10 of ITAR says “technical data” includes “blueprints, drawings, photographs, plans, instructions or documentation” about “the design, development, production, manufacture, assembly, operation, repair, testing, maintenance or modification of defense articles” — so that appears to cover CAD files for guns.

Unsurprisingly, Defense Distributed is already saying (melodramatically) that it will fight the takedown demand: “It seems we may have to have our rights declared in court to simply keep developing gun files to put into the public domain. DD’s right to exist is being challenged.”

What will probably happen next is that Defense Distributed will apply for an export license, which the State Department will deny, and Defense Distributed will sue to get a judge to issue an order that the State Department can’t block it — and that is where things will get interesting.

Angle 2: Gun Control Laws

Because the Liberator is made mostly of plastic, Defense Distributed also has to contend with the Undetectable Firearms Act. This law, first passed in 1988 and renewed in 2003, makes it illegal to “manufacture, import, sell, ship, deliver, possess, transfer, or receive” any firearm that can’t be detected by x-ray machines. Gunsmiths with a federal firearms license (Wilson has one) can build guns to test them for compliance, but other than that, undetectable guns are completely contraband. Wilson packaged the CAD files with detailed instructions, including an admonition to DIYers to include a block of metal in a hole specifically included in the design for that purpose. It’s up to the person doing the printing to comply, though. If you don’t put the metal block in, you could be in big trouble. It is probably just a matter of days until the ATF or FBI start knocking on the doors of people who’ve already started posting pictures of their 3D printed guns online.

Notably, the Undetectable Firearms Act bans the atoms, but not the bits: you can possess CAD files for an undetectable firearm without violating it. That’s an easy legislative patch, but it will run into free speech problems.

Angle 3: First Amendment Meets Second Amendment

I predict the Constitutional wrangling will focus on the First Amendment, not the Second. (For foreign readers, the First Amendment to the US Constitution provides extremely strong protections for citizens’ freedom of speech, and the Second Amendment provides a right “to keep and bear arms” — although the language is a mess and reasonable people disagree on how to interpret it.) This is going to spawn some strange bedfellows: I would not be surprised to see the NRA and ACLU on the same side in this fight.

Why is this a First Amendment case? One of the issues is whether the government can prevent citizens from publishing gun blueprints. A big gateway question, though, is how to characterize Defense Distributed’s CAD files in the first place. Is a CAD file expressive speech that should be protected, or a functional thing that should be regulated? This distinction is important because the government has tremendous power to regulate things, but far less power to regulate speech. When courts first started to come to grips with software, they came out on the side of protecting it as speech despite its functional aspects, but they might view 3D printing files differently because when you “run” them, you get things.

President Clinton’s Executive Order No. 13026 relaxing the crypto ban (more on that below) recognized the speech–functionality distinction:

Because the export of encryption software, like the export of other encryption products described in this section, must be controlled because of such software’s functional capacity, rather than because of any possible informational value of such software…

In addition to the CAD files themselves, there is also Wilson’s act of publishing them. Is the act of publishing a functional gun blueprint speech? Two Supreme Court free speech cases give a partial roadmap.

The first is United States v. O’Brien, in which the Supreme Court upheld a criminal conviction for burning a draft card. The Court found the defendant’s conduct was expressive, but still upheld his conviction because the law under which he was prosecuted — a prohibition on destroying draft cards — had justifiable military purposes that outweighed his free speech right. One could see courts today taking a similar path by finding that the government’s interest in controlling the flow of firearms and military information outweighs Defense Distributed’s right to publish gun design files.

The other is the Pentagon Papers case, New York Times v. United States. There, the New York Times sought to publish damning internal Pentagon documents about the Vietnam War. Even though the material was directly related to national security, the Court allowed the New York Times to go forward, finding the newspaper’s speech interest was greater than the government’s interest in preserving the confidentiality of classified information. The case helps Defense Distributed to the extent it struck down a prior restraint on speech, but publishing proof-of-concept plastic pistol blueprints is not in the same league as exposing government misconduct.

The Crypto Cases

This isn’t the first time courts have had to sort out the mess when innovation hurtled into arms control law and the First Amendment. The US Munitions List used to cover a wide range of cryptography software, a restriction only relaxed in 1996 by an Executive Order by President Clinton — who, even then, perhaps, realized the futility of censoring the spread of code. Before that, though, PGP creator Phil Zimmerman was criminally investigated, but never charged, for violating ITAR. The issue made its way to the courts in 1997 in Bernstein v. US Department of State, where Daniel Bernstein, a UC Berkeley computer science researcher, sued to be allowed to publish his cryptography research, which included working code. Judge Marilyn Hall Patel of the U.S. District Court for the Northern District of California found that it was unconstitutional for the government to prevent Bernstein from publishing his crypto software. Judge Patel held that blocking Bernstein’s publication amounted to a prior restraint on his speech that violated the First Amendment.

Defense Distributed will likely follow Bernstein’s path. The State Department’s takedown demand probably qualifies as a prior restraint, to which courts are incredibly hostile. But the ability to download a file, press “Print,” and have gun parts come out could also tip some judges toward calling gun CAD files functional things and allowing the government to regulate them.

Just Because You Can Doesn’t Mean You Should

There’s more to this than law, however. There is also ethics and common sense. Even if you can publish 3D-printable gun blueprints, should you? What are the consequences of doing it?

Nobody in the 3D printing industry is going to thank Wilson for bringing heat from the State Department and Congress. Wilson’s stunt could well lead to new restrictions and regulations on the nascent digital manufacturing industry, even before it has had a chance to figure things out for itself. (Scaremongers like these clowns won’t help either.) And for what? The Liberator isn’t about to liberate anybody — it will probably melt or explode after one or two shots. Given the Bernstein case, even if he wins, Wilson may not even be breaking any new legal ground.

Interesting to look at the legalities from a USA perspective.
 
On further research, it appears that this "gun" is a single shot design - basically a mini musket. Not only will it probably fall apart after minimal use, but it has no real practical use either.
 
Personally, I'd rather the plans for Jessica Alba were available, but the 3D gun might help clear a path to the real version of her.

What are your thoughts about the implications of such game changing technology?

Imagine the porno industry getting its hands on this technology.

I would imagine the 'money shot' would be so realistic you would duck for cover
 
yeah we could create replica macedonians complete with the cause modules & no slave mentality.The problem is the existing macedonians will reprogram them to the fyrom way.
 
A New 3D-Printed Gun Is Here, And It's Cheaper And Stronger Than Ever

A New 3D-Printed Gun Is Here, And It's Cheaper And Stronger Than Ever

http://www.huffingtonpost.com/2013/05/20/new-3d-gun_n_3308533.html

It's just as we suspected and feared. After the first 3D-printed gun was created and released by a company called Defense Distributed, copycat firearm printers are popping up. A man who goes by "Joe" has created a newer, sturdier and cheaper 3D-printed gun that he calls the "Lulz Liberator," and now there's a video of the gun firing.

The Lulz Liberator is scary for a few reasons. First of all, it is ridiculously cheap. It cost $25 to print on Joe's $1,725 3D printer, Forbes reports. It's also robust. This gun seems sturdier than the original 3D gun. "One plastic barrel survived eight shots," according to the YouTube video's description. The technology has already come pretty far in just a few weeks. Imagine what a few years will bring?

Read the whole story at Forbes.

In May, Defense Distributed, the company that created and disseminated the first 3D gun blueprint, was forced to take the blueprints off of its site by the U.S. State Department. The gun blueprint then quickly found its way to Pirate Bay, where it has remained ever since.

"I'm not an anarchist," Joe tells Forbes, "but I don’t like the idea that the government is telling us ‘You can’t have that.’” Thankfully for us all, Joe has yet to release the blueprints to the public.

http://youtu.be/g3eDSGVsLQU

The important point to note from the Youtube link is "Thank god. Now we're safe from Magneto"
 
Back
Top